Electrical hazards & documentation
Electrical work carries serious risks — electric shock and arc flash from live working, isolation and lock-off failures, cable pulling injuries, and working at height for containment and lighting. Our RAMS set out safe isolation procedures, permit-to-work controls, test-before-touch, and PPE so you can demonstrate control to clients and principal contractors.
Recommended packs for electrical
See all RAMS templates, the full shop, or grab 5 free templates.
The 9 documents in this set
Editable Word documents, each with document control, purpose, scope, applicable legislation, responsibilities and competence requirements. Nothing is locked and nothing is pre-filled — you adapt each one to the actual works.
Cable Jointing & Terminating RAMS
To define the safe system of work for cable jointing & terminating so that the works are carried out without risk to the health and safety of operatives, other workers or the public, and in compliance with the relevant legislation.
Cable Laying RAMS
To define the safe system of work for cable laying so that the works are carried out without risk to the health and safety of operatives, other workers or the public, and in compliance with the relevant legislation.
EV Charger Installation RAMS
To define the safe system of work for ev charger installation so that the works are carried out without risk to the health and safety of operatives, other workers or the public, and in compliance with the relevant legislation.
Electrical Safe Isolation RAMS
To define the safe system of work for electrical safe isolation so that the works are carried out without risk to the health and safety of operatives, other workers or the public, and in compliance with the relevant legislation.
Fibre Installation RAMS
To define the safe system of work for fibre installation so that the works are carried out without risk to the health and safety of operatives, other workers or the public, and in compliance with the relevant legislation.
Overhead Poling RAMS
To define the safe system of work for overhead poling so that the works are carried out without risk to the health and safety of operatives, other workers or the public, and in compliance with the relevant legislation.
Safe Isolation of Electrical Supply Procedure
To set out the procedure for safe isolation of electrical supply so that it is carried out consistently, safely and to the required standard across the project.
Solar PV Installation RAMS
To define the safe system of work for solar pv installation so that the works are carried out without risk to the health and safety of operatives, other workers or the public, and in compliance with the relevant legislation.
Toolbox Talk – Electrical Safety
To brief operatives on electrical safety, reinforce safe behaviours and provide a record of attendance.
Legislation referenced
- Health and Safety at Work etc. Act 1974
- Construction (Design and Management) Regulations 2015
- Management of Health and Safety at Work Regulations 1999
- Personal Protective Equipment at Work Regulations 1992
- Reporting of Injuries, Diseases and Dangerous Occurrences Regulations 2013
- Provision and Use of Work Equipment Regulations 1998
- Lifting Operations and Lifting Equipment Regulations 1998
- Electricity at Work Regulations 1989
Templates, not certificates. Every Pro Site Docs document is an editable template written in line with CDM 2015 and current UK health & safety requirements. It is not automatically compliant on its own: a competent person must review and adapt each document for the specific works, site and conditions before it is used or submitted.